Accurate Flow Measurement in Large Pipes

WEFTEC PRODUCT SHOWCASE

Teledyne Isco

Booth 24043, Hall B

ADFM Pro 20 combines pulse-Doppler technology and range-gating signal processing to measure velocity profile in large pipes and channels.

The ADFM® Pro20 from Teledyne Isco brings unparalleled flow measurement accuracy to large pipes and channels, delivering flow rate data within 2% of actual value, in flow depths up to 20 feet (6 m).

Four piezoelectric ceramics in the sensor emit short pulses along narrow acoustic beams pointing in different directions to measure velocity. A fifth vertically-aimed ceramic mounted measures the depth.

Each acoustic beam measures velocity at multiple points, known as bins, in the water column. The measured velocity data within each bin are very precise – to within 0.01 ft/s. This distribution of accurate velocity measurements is then used to determine the flow pattern over the entire cross-section of flow. Since the flow pattern and measured velocity distribution are dependent on each other, the ADFM’s advanced flow algorithms automatically adapt to changing hydraulic conditions within the pipe. This removes the need for in-situ calibration and insures accurate flow rate measurement over a host of different measurement environments and hydraulic conditions.

The ADFM enclosure houses the signal processing, data logging, and data output electronics. The enclosure is available as a NEMA 4X Box housing, suitable for wall or console mounting in permanent applications, and a NEMA 6P cylindrical housing for use in manholes or other “wet” environments.

Features

• Quad-redundant velocity sensors and depth sensor combined in a single housing
• Data quality verification information (signal strength and correlation)
• In-situ calibration never required
• Real-time data output

Applications

• Combined sewer systems and outfalls
• Irrigation canals and channels
• Stormwater conveyance and outfalls

Visit Booth #24043 in Chicago to learn more about the new 4700 and Isco’s entire line of samplers, flow meters, and data and communication products.

Teledyne Isco Inc.
4700 Superior St.
Lincoln NE 68504
Tel: (402) 464-0231; (800) 228-4373
www.isco.com
e-mail: iscoinfo@teledyne.com